MASK Control Systems - Bespoke Industrial Automation & Control Systems UK
End-of-Line RoboticsEN ISO 10218-1/2 & Cat 4 Safety

End-of-Line Robotic Palletising Automation: 6-Axis Palletisers, Stretch Wrapper Interlocks & Category 4 Safety Systems

Engineered for UK food processors, chemical plants, and high-volume FMCG warehouses. MASK Control Systems Ltd delivers turnkey robotic palletising control panels, 6-axis articulated robot kinematics, automated stretch wrapper interlocks, empty pallet magazine sequencing, and Category 4 / PLe safeguarding that eliminate manual handling injuries and maximize throughput.

Industrial Robotic Palletising Cell and End of Line Control Panel System UK

Custom robotic palletising control panels engineered in Cullompton, Devon.

Up to 4 Lines
Multi-Infeed Robotic Cells
100% Zero Manual
Lifting & Heavy Bag Handling
Cat 4 / PLe
EN ISO 13849 Cell Safeguarding
GS1-128
Automated SSCC Pallet Label Handshake

Transforming End-of-Line Bottlenecks into Autonomous Pallet Operations

Manual palletising is among the most frequent causes of repetitive strain injuries, absenteeism, and production bottlenecks across UK factories. Relying on operators to manually stack 25kg bags, cases of canned goods, or delicate beverage packs at high line rates inevitably leads to fatigue, dropped cartons, and unstable pallet stacks that collapse during road transport.

Headquartered in Cullompton, Devon, MASK Control Systems Ltd engineers turnkey robotic palletising automation that operates continuously 24/7. We integrate multi-vendor articulated robots (ABB, KUKA, Fanuc, Yaskawa), design bespoke vacuum and mechanical End-of-Arm Tooling (EOAT), automate pallet magazines and stretch wrappers, and program safety-rated PLC architectures that protect plant personnel while maintaining peak OEE.

Robotics Capabilities

Turnkey End-of-Line Automation Disciplines

From case infeed collation to stretch-wrapped pallet dispatch, our control engineers build deterministic, low-maintenance robotic automation:

6-Axis & Gantry Robot Kinematics

Articulated arm and high-payload linear gantry palletisers. Features multi-infeed case collation, high-speed case turning orientors, and deterministic trajectory pathing handling up to 1,200kg full layer pallet loads with smooth acceleration curves.

High-Payload 6-Axis Motion & Gantry Sizing

Bespoke Vacuum & Mechanical EOAT

Custom End-of-Arm Tooling designed in CAD. Integrates multi-chamber vacuum foam pads (Piab/Schmalz) for corrugated boxes, servo-driven bottom-support forks for 25kg flour sacks, and secondary suction cups for automatic slip-sheet placement.

Multi-Chamber Vacuum & Servo Fork Grippers

Pallet Magazines & Auto Dispensers

Hydraulic and pneumatic empty pallet de-stackers holding 15 to 20 wooden or plastic pallets. Integrates optical pallet damage inspection sensors, automated pallet centering stops, and heavy-duty triple-strand chain conveyor transfers.

Automated Pallet Inspection & Chain Transfers

Rotary Arm & Turntable Stretch Wrappers

Direct digital integration with automatic stretch wrappers. Features power pre-stretch film tensioning (up to 300%), automated film clamps, hot-wire film cut-and-seal assemblies, top sheet cover dispensers, and recipe-based wrap cycle profiles.

300% Pre-Stretch Film Savings & Auto Cut/Seal

GS1 Pallet Labelling & AGV Dispatch

Corner-wrap and two-side automated print-and-apply labelling machines applying GS1-128 Serial Shipping Container Code (SSCC) labels. Communicates with plant AGV / AMR vehicle fleets over industrial wireless for autonomous pallet dispatch to dispatch docks.

SSCC Barcode Verification & AGV Handshakes

Touchscreen 3D Pallet Pattern Builder

Eliminate reliance on robot programmers for new product introductions. Our HMI software features an intuitive drag-and-drop 3D pallet layer builder where operators set box dimensions, interlock styles, slip-sheet intervals, and tie-sheet placement in seconds.

Touchscreen Graphical Layer Pattern Generation
Functional Safety

EN ISO 10218-1/2 & Category 4 / PLe Safety Architectures

Industrial palletising robots move heavy payloads at velocities exceeding 2 metres per second. Inadequate perimeter safeguarding, faulty muting logic, or unmonitored safety doors present extreme hazards to plant personnel.

MASK Control Systems designs safety systems compliant with the latest UK and European machinery safety mandates:

  • Optical Safety Light Curtains with Muting: Entry and exit conveyor tunnels feature cross-beam sequential muting sensors, allowing full pallets to pass while maintaining an immediate emergency stop if personnel cross the beam.
  • Trapped-Key Interlocks & Safe Access: Fortress / Castell interlock key exchanges ensure that robot power is fully isolated and mechanical axis brakes are locked before operators can enter cell gates for cleaning.
  • Safe Robot Zone Monitoring: Integrated software safety zones (KUKA SafeOperation, ABB SafeMove, Fanuc DCS) that electronically enforce geometric keep-out envelopes, preventing the arm from exceeding safe boundaries.

Robotic Compliance & Standards Matrix

BS EN ISO 10218-1/2 Robotics SafetyStandard Aligned

Mandatory design rules for industrial robot integration, perimeter guarding, and speed monitoring.

BS EN ISO 13849-1 (Cat 4 / PLe)Fail-Safe Circuits

Dual-channel safety PLC hardware managing light curtains, E-stops, and safe torque off (STO).

BS EN 619 Continuous Handling SafetyConveyor Systems

Safeguards against nip and pinch points on heavy roller, belt, and chain pallet transfer conveyors.

PUWER 1998 Provision & Use RegulationsUK Workplace Law

Ensures all automated machinery provided to UK factory workers meets statutory safety regulations.

Control Architecture

Multi-Vendor Robot, Safety PLC & ERP Integration

We engineer vendor-independent control panels communicating seamlessly with any major industrial robot brand:

Siemens SIMATIC S7-1500F

Fail-Safe PLC

Controls pallet infeed lines, dispenser motors, and communicates safety logic over PROFIsafe to KUKA or ABB robot controllers, eliminating redundant hardwired safety relays.

Rockwell GuardLogix 5580

CIP Safety

Dual-core safety processor managing high-density POINT Guard I/O and CIP Safety over EtherNet/IP directly to Fanuc or Yaskawa robots, Kinetix servo drives, and stretch wrappers.

WMS & ERP Integration

OPC UA / MQTT

Automated bidirectional data exchange with SAP, Microsoft Dynamics, or warehouse management systems. Automatically logs completed pallet serials, confirms SKU destination, and commands AGVs.

Technical Guidance

Frequently Asked Questions: Palletising Automation

Key questions asked by UK logistics managers, operations directors, and plant engineers:

How do optical safety light curtains distinguish between a loaded pallet and a human worker?
We engineer sequential optical muting using cross-beam photoelectric sensors or time-difference evaluation algorithms connected to our safety PLC. When a loaded pallet exits on the roller conveyor, it interrupts the muting sensors in a deterministic sequence and speed window, temporarily suspending light curtain tripping for that pallet. If an operator walks through or interrupts the beams out of sequence, the safety controller instantly initiates an emergency Category 0 stop to robot kinematics.
Can a single robotic palletising cell handle multiple production lines simultaneously?
Yes. Our multi-infeed robotic palletising cells can service 2 to 4 separate production lines concurrently. The 6-axis robot utilizes a custom multi-zone vacuum or servo-clamp End-of-Arm Tool (EOAT) to pick products from distinct infeed accumulation lanes and deposit them onto corresponding pallet build stations, each executing independent layer pattern recipes, slip-sheet placement, and stretch wrapper dispatching.
What safety standards govern robotic palletising workcells in the UK?
UK robotic cells are governed by BS EN ISO 10218-1 (robot safety requirements), BS EN ISO 10218-2 (robot systems and integration), and BS EN ISO 13849-1 (functional safety). All perimeter guarding, interlocked safety gates, emergency stops, and light curtains are engineered to Category 4 / PLe, incorporating trapped-key access locks and safe robot software zone monitoring (such as ABB SafeMove, KUKA SafeOperation, or FANUC DCS).
How are new pallet layer patterns created and loaded into the robot?
Rather than requiring a robotics engineer to reprogram coordinate waypoints manually, our control systems feature a graphical 3D Pallet Pattern Builder on the touchscreen HMI. Operators simply enter carton dimensions, select pallet type (UK standard 1200x1000mm or Euro 1200x800mm), and drag-and-drop layer patterns visually. The PLC automatically calculates robot pick coordinates, slip-sheet intervals, and tie-sheet placement.
Can the palletising system interface directly with automated guided vehicles (AGVs) or AMRs?
Yes. We program deterministic digital handshakes over industrial Wi-Fi or Industrial Ethernet (PROFINET / EtherNet/IP) between the pallet discharge outfeed conveyor and your plant AGV or autonomous mobile robot (AMR) fleet manager. The PLC communicates pallet readiness, verifies vehicle positioning, confirms optical safety interlocks, and signals safe departure with automated SSCC barcode transfer.
End-of-Line Robotics Engineering

Eliminate Manual Palletising & Boost End-of-Line Reliability

Discuss your robotic palletising workcell, multi-line collation, stretch wrapper upgrade, or Category 4 safety requirements with our senior automation engineers. We deliver bespoke electrical designs, proven robot software, and seamless on-site commissioning across the UK.

WhatsApp